25
OPERATION & USE
Ending a Massage
• To end in the middle of a massage press the Power button. The rollers will return to their storage position
(in the seat), and the chair will return to an included position.
• Upon the conclusion of any auto program, air, or manual massage, the rollers will automatically return to
their storage position (in the seat), and your chair will restore the upright position.
• Never get out of the chair without first returning it to its full upright position.
Adjusting Speed
• During a Manual massage, the speed of the massage movements can be adjusted.
• When a Manual massage is selected, the massage will default to SLOW. In this case the button will
illuminate white.
• If you prefer faster massage movements, press the Speed button until it illuminates white which indicates
a slow massage.
Adjusting Chair Angle
• To recline the angle of the chair’s back and incline the legrest, press and hold the Recline Down button.
• To incline the angle of the chair’s back and restore legrest toward a resting position, press and hold
the Recline Up button.
Turning on Low Back Heat
• Low back heat can be enjoyed on its own, or during any auto or programmed massage.
• To turn on heat, press the Heat button. When heat is on, the button will illuminate red.
• To turn off heat, press the Heat button a second time. When heat is off, the button will not be illuminated.
• Note: heat will automatically shut off after 20 minutes.
