Positive Grid Spark 40, Руководство пользователя

Страница: 6 / 14

USING SPARK AMP AS USB AUDIO INTERFACE
•
Connect to a computer with the bundled USB cable, use “Spark USB Audio” as recording/playback
device.
•
By default, the guitar signal is recorded after Amp/FX modeling. To record a dry guitar signal, use the
SPARK app to bypass all Amp/FX modules.
•
The USB playback volume is controlled via the MUSIC VOLUME knob.
•
If input monitoring is enabled in your recording/DAW software, you can monitor your guitar signal in your
recording/DAW software (controlled by MUSIC VOLUME knob) and through the amp itself (controlled by
OUTPUT knob).
•
Windows driver for ASIO support can be found in Spark help center.
FACTORY RESET
•
Turn off the device.
•
Press and hold the TAP button when turning on Spark amp, then release the TAP button when it starts to
blink.
•
Long-press the blinking TAP button until all four (1~4) LEDs buttons blink once, then release the TAP
button.
•
The TAP button needs to be released as soon as all four LEDs blink.
•
Press the TAP button to cancel factory reset.
•
If the TAP button is blinking and the CH1 LED is on, this means the factory reset process is now
complete.
•
This process will reset all four presets stored on the Spark amp as well as its bluetooth pairing
information. Remove Spark Amp from recognized devices in Bluetooth settings before pairing again.
05