Positive Gaming Impact Arcade, Руководство пользователя

Страница: 7 / 10

Personalizing Your Dance Platform
The dance platform has a small area above the
select buttons which can be used to personalize
it using these simple steps:
(See Figure 3)
1 Use the small Allan key to remove the two
screws of the clear plastic plate .
2 Replace the inlay with your own custom made
one . The required size is 80 x 30 mm
(3 .15 x 1 .18 inches) .
Physically Connecting Two Platforms
For use with two Positive Gaming
™
Impact Arcade Dance Platforms, using doubles mode play .
1
Locate the four platform-merger brackets .
2
For the first dance platform, use the supplied Allen
key tool to unscrew the four large screws on the
right edge of the platform and the two small
screws of the tag in the upper top right corner .
3 For the second dance platform, unscrew the four
large screws on the left edge of the platform .
4
On both dance platforms, gently lift the top layer
a bit and remove all white washers under each
screw hole .
(See Figure 4)
5
On the left dance platform, insert one platform-merger bracket under each of the four
screw holes .
6
Slide the right dance platform into the left platform’s four platform-mergers .
7
Replace and fasten all screws on both platforms again . Keep the extra white washers in
case you want to separate the platforms again .
6
Figure 3
Figure 4