POSITECTOR Powder Checker, Инструкция по эксплуатации

Страница: 29 / 32

26
The battery indicator displays a full bar with fresh alkaline
or fully charged batteries installed. As the batteries weaken, the
bar will be reduced. When the battery symbol is low
the Gage can still be used, but the batteries should be changed or
recharged at the earliest opportunity. The Gage will turn off
automatically when batteries are very low, preceded by a Low
Battery Warning on the display.
To retain all user settings and stored memory readings, only
replace the batteries after the Gage has powered-down.
PosiTector Body
PosiTector Body
Power Supply / Battery Indicator
Power Supply / Battery Indicator
Power Source: 3 AAA alkaline, Lithium or optional Nickel-metal
hydride (NiMH) rechargeable batteries. For best battery indicator
results, ensure the appropriate Battery Type is selected in the
Setup > Battery Type menu (pg 14).
Battery performance decreases at low temperatures.
!
Use only “AA alkaline batteries” (3) in the
probe. Nickel-cadmium and nickel-metal
hydride rechargeable batteries will work but the
probe battery state indicator icon may appear
to have weak batteries . The gage will
turn off automatically when batteries are very
low, preceded by a low battery warning on the
display. If batteries are very low the gage may
startup but then turn off quickly.
Changing Probe Batteries
Changing Probe Batteries
Temperature
Temperature
Operating Range: +32° to +120°F (0 to +50°C)
The
PosiTector PC compensates automatically for temperature.
Allow a few minutes for the probe to reach ambient temperature
before measuring.
Discard the first measurement taken in a notably different
temperature condition. When measuring surfaces much hotter or
colder than ambient, lift the probe at least 6 inches (15cm) and
allow 1 second off the surface between measurements.