Page 4
Instruction Leaflet Kit Encoder BiSS C / SSI
Version: 20211122
INSTRUCTION LEAFLET
IXARC KIT ENCODERS WITH BISS -C/SSI INTERFACE
Electrical Data
Supply Voltage
4.75-15 VDC
Power Consumption
≤
0.3 Watt
Start-up time
Max
100 ms
Clock Input
RS 422
Clock Frequency
KCD-BC01B: 300 kHz - 10 MHz
KCD-BC03B: 80kHz
–
10MHz
KCD-S1xxB: 300
kHz - 1 MHz
Reverse Polarity Protection
Yes
Short Circuit Protection
Yes
Max. Permissible Electrical Speed
12 000 RPM
Config Pin
VOL: Output Low level: 0 V …
0.4 V DC
VOH: Output High Level: 2.4 V … 3.3 V DC
VIH: Input High Level: 2 V … 3.3 V DC
VIL: Input Low Level: 0 V … 0.8 V DC
+5 V DC level tolerant, do not exceed.
Preset Pin
Low level: 0 V … 0.8 V DC
High Level: 2 V …15 V DC
EMC
Kit encoder is a sub-assembly and not considered to be an
independent system, therefore compliance with CE requirements
has to be ensured by the integrator for the overall set-up.
For more detailed information please refer to the data sheet and manual available on the website.
