Part 8
BASE MOUNT UPGRADE KIT
Please follow the instructions on the manual that comes along with the
2
nd
customer display LM-3010/LM-3014/LM-3015, and PD-6307 if installed.
1.
For Second LCD Display
There are LM-3010/LM-3014/LM-3015 available
for 2
nd
LCD display, needed to combine with XT3015
with supporting bracket to tighten.
Please refer to the following steps to assemble properly.
Please take out the join bracket and use the attached 4
pcs long screws to fasten this bracket to the main unit
back cover which is circled in the right picture.
Next, please connect the VGA Cable to the LM VGA
port and route the VGA cable through the cable exit of the
base stand to the system VGA ports.
Note: When XT-3015 series equipping with LM-3010/3014/3015 series
second LCD monitor, system power adaptor must be upgraded from 60W
to 80W (or kept as 60W) .
UPS Battery Installation Inside Gen 8 BASE:
Inside Gen 8 base, UPS battery can be installed below:
Step A: Slide the UPS battery inside the casing
then tighten the screws included in the package.
Step B: Route the UPS battery cable to the
