manualshive.com logo in svg

POSIFLEX PB-7700 Series, Техническое руководство

Поделиться
Скачать
POSIFLEX PB-7700 Series Скачать руководство пользователя страница 32

 

 PB-7700 series Technical Manual 5 - 6

Ÿ 

To enable UPS function: <06> <16> <19> <1F> <05> or <1B> <00> <00> 

<00> <00> <18> <00> <18> 

Ÿ 

To disable UPS function: <06> <16> <19> <1F> <04> or <1B> <00> 

<00> <00> <00> <18> <18> <00> 

UPS SOFTWARE DETECT 

The UPS status is used to inform the software the power source the system is 

operating on (AC power or UPS battery). The default of this jumper for a PB7700 

delivered with UM-7700 installed is set to detect the UPS status to enable the software 

detection on existence of AC power. When the DCD bit of COM1 is set, the AC power 

is present. The user has to change this jumper if he/she wants to detect the standard 

DCD signal on COM1. However, for PB7700 without UM-7700, the default setting is 

to detect standard DCD signal. 

JP11 ON PB7700 M/B STATUS 

COM1 PIN 1 STATUS 

1 – 2 short 

Normal (DCD signal) 

2 - 3 short 

Detect UPS status with UM-7700 

UPS DETECTION FUNCTION 

In PB7700 system with UM-7700, when the system is working on UPS battery 

power, the status is indicated by LED and is detectable by software. This “operating on 

battery” signal can be obtained through checking the communication status of COM1 at 

signal DCD provided this signal is not engaged elsewhere (In other words, Modem is 

not recommended to be used on COM1). When the system is working on AC power, the 

DCD signal of COM1 is reset (value = 0). When the system is working on battery 

power, the DCD signal of COM1 (BATTWK signal) is set (value = 1). The DCD signal 

is obtained as the bit 7 (the most significant bit) of the I/O address 3FEh if the COM1 

address is set to 3F8h~3FFh (conventional address for COM1) in system configuration. 

There is further an auto detect function on the existence of UPS battery provided. 

This capability supports the Posiflex software installed in the preloaded operating 

system of Windows to enable or disable the UPS function automatically as long as it is 

initialized. The system is capable to detect the existence / status of UPS battery and to 

respond to 2 query command strings. These 2 query command strings have to be sent as 

«

 

Содержание PB-7700 Series


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды