8
Replacing the Pistol Grip with a Hand Strap Cover (Optional)
The hand strap cover is an optional peripheral designed for users to easily hold
the tablet for operation. To replace the pistol grip with a hand strap cover,
follow the steps listed below.
1.
While pushing the release lever to the left
(
1
), slide the pistol grip in the direction
indicated by the arrow in the figure (
2
).
2.
Pull the pistol grip off from the tablet.
3.
Align the hand strap cover with the grooves
on the rear side of the table.
4.
Make sure that the hand strap cover is well
attached to the rear side of the tablet.
5.
Slide the hand strap cover up in the
direction indicated by the arrow until it is
clicked into place.
Содержание MT-4210A
Страница 16: ...16 MEMO ...
