POSIFLEX LM-2008E, Руководство пользователя

Страница: 4 / 10

4
Connecting VGA and USB Cables
Gen6 base features its own cable management to help you well organize the
cords. The following will provide some useful cable-routing instructions for
you to connect VGA and USB cables to TM/LM-2008E.
1.
Tilt the display all the way down.
2.
To remove the cable cover at the rear of the
terminal, pull the four locking levers outwards
with your fingers and slide the cover in the
direction shown by the arrow.
3.
Tilt the screen upwards, and then have the cables
pass through the cable exit.
4. Connect the monitor to the terminal using VGA cable.
4.1 Connect one end of the VGA cable to the
VGA port at the bottom I/O plate of your
monitor.
4.2 Take the other end of VGA cable to insert it into the VGA port of
your terminal.
5. For TM series , please connect the monitor to the terminal using USB
type A to B cable to enable touch function for your monitor.
5.1 Grab Type-B connector of USB cable,
and then insert it into Type-B USB port of
your monitor
5.2 Properly attach Type-A connector of USB cable to your POS
terminal.
Cable exit