Part 6
INSTALLATION GUIDES
CAUTION: Before any installation or cable connection to the set, please
always make certain that the system is turned off and the
external power source to the set is removed to prevent electric
hazard! Never touch any metal pin in the connectors or
circuits to avoid high voltage hazard or electrostatic discharge
damage unless the operator is well grounded. Failure to do the
above will void the product warranty!
TECHNICAL MANEUVERS
Applicable technical maneuvers in KS-6812 series include serial
COM port power supply settings, VGA port power supply setting, system
CMOS data reset, DRAM upgrades, physical access to CF memory card if the
CF card reader option is installed and installation of optional SATA HDD in
base. All these technical maneuver operations require purchase of applicable
Technical Manual from Posiflex or consultation from Posiflex authorized
dealers and should be handled only by a
qualified technician
.
TILTING LCD PANEL
The tilting mechanism in KS-6812 series utilizes
hinges and there is no particular skill to turn the LCD panel to
most suitable angle for either viewing or convenience in cable
connection / disconnection.
DISCONNECTING ALL CABLES
With the LCD panel turned to most backward position, the main I/O
connector area will be easily accessible at bottom side of the main unit. Please
first note orientations of every existing cable connection
and then
disconnect every cable properly before any further reconfiguration of cable
connections. Please note that the click lock spring has to be pressed down prior
to pulling out the connector such as the LAN port or the CR port or the
alternate RJ45 form COM3 port. Please also note that the fixing screws have to
be loosened free prior to disconnection such as the 2 regular DB9 form COM
ports or the VGA port. Please
always hold the connector head
instead of
pulling on the cable wire when disconnecting any connector. Failure to do this
could damage the cable and jack that is considered as an
artificial destruction.
Damages due to incorrect disconnection operation are not covered by
product warranty!
