POSIFLEX KS - 2010, Руководство пользователя, Страница: 8 / 19

Part 8
CONNECTING CABLES
To have the re-assembled main unit with stand assembly ready for
operation, please connect all required cables to the appropriate connectors.
Please make sure that each connector is connected to the correct port with the
correct orientation.
Damages due to incorrect connection or orientation are
not covered by product warranty!
Some connectors like the LAN or COM3/4 connector have to be
gently inserted until a click is heard. It is recommended that connectors such as
the COM1/2 connector be screwed into place once seated. Please note that the
SATA cable for HDD in base should be connected with the eSATA end of the
cable to the main unit.
Adjust the slack of each cable. Re-adjust the tilt angle of the screen
for best viewing.
Connect the cables to appropriate external devices through the cable
exit at the bottom of stand assembly. Please make sure that each connector has
to be connected to the right device in the right way.
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and jack
that is considered as an artificial destruction and is not
covered by the warranty.
OPERATING SYSTEM RECOVERY
For KS-2010 / KS-2010A systems with operating system in the
Compact Flash Card, once the Compact Flash is damaged for any reason, the
thin client may fail to boot.
A bootable new Compact Flash Card will be
required to have the workstation back to work . Please follow instructions
given by the System Integrator to deal with situations like that. One more
advice for CF Card application is that in spite of the fact that it is used in the
way like an ordinary HDD, usual utilities such as
FDISK.EXE or
FORMAT.COM shall never be used on CF Card otherwise the boot sector
of operating system itself may be damaged and causing the CF Card no longer
bootable.
For KS-2010 / KS-2010A systems preloaded with Windows XP Pro or
WEPOS on HDD, Posiflex provides recovery DVD delivered with the touch
terminal for the preloaded operating system. The System Integrator shall take
care of software restoration after OS recovered. A Posiflex supplied USB
interface COMBO drive will be required for such action. Other brand COMBO
drive may require its specific driver different from what supported in the
recovery DVD.
Please use the recovery DVD in rescue operation only. Using it
otherwise may wipe out whatever stored in the HDD! All upgrade devices