4
Charging your MT-series Mobile POS
Follow the instructions described below to charge your battery. Also,
please note that using MT-series terminal while charging its battery
will likely slow down the charging process
.
Always ensure your
device is completely powered down before proceeding with the
following steps.
1.
Connect the connector of power adapter to the “DC IN” power
jack at the bottom of the charger. Then, properly arrange the
cable through cable passage.
2.
Connect the other end of power adapter
to the electrical outlet.
3.
Connect MT-series to the charging rack. CS-300 can support 8”
and 10.1” MT-series model.
8” MT-
series model
10.1” MT-
series model
