POSIFLEX CD-4860, Руководство пользователя по установке и настройке

Страница: 7 / 40

7
1.7
CONFIGURING
How to configure the CD-4860:
The Barcode Programming Feature gives the possibility to change the CD-
4860 scanner settings with use programming codes or with the Utility Tool.
1.7.1 Changing Scanner Settings with Programming Codes
You can set-up your CD-4860 by scan all necessary programming codes for
parameters that meet applications. After these scans the CD-4860 is direct
permanently saved. To go back to the factory default settings, just scan only
programming code factory default.
In order to change the scanner settings please follow the sequence below:
(a) Power-up the scanner.
(b) Change scanner settings by scanning any of the programming code
that meet applications.
At any moment you can stop your programming, and if needed read
programming code factory default setting for set your scanner back to default.
1.7.2 Changing Scanner Settings with Utility Tool
Posiflex has setup this user manual with the most common used
programming codes, it could be possible that you need more advanced
settings to use the CD-4860 without any problems into your application.
This tool can be used with the following operation systems: Windows98,
Windows2000, Windows XP and Windows Vista.
This Utility Tool can be delivered on request. Please contact Posiflex
Technical Support Department. You can download this USB driver from the
Posiflex web site: www.posiflex.com/