Page 2 of 3
Step 2
Insert the rail, slider and soap dish.
into place.
Fix the rail in place using the rubber
bush and brass nut on both pillars.
Replace chrome pillar caps.
•
•
•
Step 3
To adjust slider position, push button to
unlock and and release button to lock
the slider.
•
1850mm (Recommended)
680mm Rail
580mm
Chrome Cap
FLOOR
Step 1
Remove chrome caps from each pillar.
Mount the top and bottom pillars in desired
position with the screws and wall plugs.
Check the mounts are vertically aligned.
•
Rail
Slider
Elbow
(if supplied)
Brass Nut
*This product must be installed in
compliance with all relevant regional
regulations.
It is the responsibility of the installer to
ensure a waterproof seal is achieved
between the product and mounting
surface. If in doubt about the quality of
the seal, remove the product and
reinstall using silicone to ensure a seal is
achieved.
All pipe work must be thoroughly flushed
prior to the installation of the hose.
After installation all connections must be
checked for leaks.
All outlets used primarily for personal
hygiene shall deliver water at a safe
temperature as per regional regulations.
•
•
•
•
IMPORTANT:
Please read all of the
instructions before installation.
General:
•
Wall Plug
(Recommended)
Chrome Cap
Rubber Bush
Screw
Slider button
Step 2
Insert the rail, slider and soap dish.
into place.
Fix the rail in place using the rubber
bush and brass nut on both pillars.
Replace chrome pillar caps.
•
•
•
Step 3
To adjust slider position, push button to
unlock and and release button to lock
the slider.
•
1850mm (Recommended)
680mm Rail
580mm
Chrome Cap
FLOOR
Step 1
Remove chrome caps from each pillar.
Mount the top and bottom pillars in desired
position with the screws and wall plugs.
Check the mounts are vertically aligned.
•
Rail
Slider
Elbow
(if supplied)
Brass Nut
*This product must be installed in
compliance with all relevant regional
regulations.
It is the responsibility of the installer to
ensure a waterproof seal is achieved
between the product and mounting
surface. If in doubt about the quality of
the seal, remove the product and
reinstall using silicone to ensure a seal is
achieved.
All pipe work must be thoroughly flushed
prior to the installation of the hose.
After installation all connections must be
checked for leaks.
All outlets used primarily for personal
hygiene shall deliver water at a safe
temperature as per regional regulations.
•
•
•
•
IMPORTANT:
Please read all of the
instructions before installation.
General:
•
Wall Plug
(Recommended)
Chrome Cap
Rubber Bush
Screw
Slider button
Step 2
Insert the rail, slider and soap dish.
into place.
Fix the rail in place using the rubber
bush and brass nut on both pillars.
Replace chrome pillar caps.
•
•
•
Step 3
To adjust slider position, push button to
unlock and and release button to lock
the slider.
•
1850mm (Recommended)
680mm Rail
580mm
Chrome Cap
FLOOR
Step 1
Remove chrome caps from each pillar.
Mount the top and bottom pillars in desired
position with the screws and wall plugs.
Check the mounts are vertically aligned.
•
Rail
Slider
Elbow
(if supplied)
Brass Nut
*This product must be installed in
compliance with all relevant regional
regulations.
It is the responsibility of the installer to
ensure a waterproof seal is achieved
between the product and mounting
surface. If in doubt about the quality of
the seal, remove the product and
reinstall using silicone to ensure a seal is
achieved.
All pipe work must be thoroughly flushed
prior to the installation of the hose.
After installation all connections must be
checked for leaks.
All outlets used primarily for personal
hygiene shall deliver water at a safe
temperature as per regional regulations.
•
•
•
•
IMPORTANT:
Please read all of the
instructions before installation.
General:
•
Wall Plug
(Recommended)
Chrome Cap
Rubber Bush
Screw
Slider button
