Page 2 of 3
Installation Instructions
FOR ASSEMBLY:
• First, check the content to make sure the nothing is missing
• Sort out the parts and fittings as shown
• Assemble product step by step
• It is preferable to rest the product on a soft surface to avoid damage during assembly
• Do not overtighten screws and fittings
• Re-tighten all screws and fittings periodically
• You will need a Phillips Screwdriver to complete this assembly
INSTALLATION INSTRUCTIONS:
1. Ensure wall is vertical and plumb. Measure and mark out position of vanity wall mount fixing and
screw fixing to wall.
Critical: Ensure wall mount fixing is level before fitting vanity unit. If fixing to timber framed cavity walls or
partitioning, care should be taken to ensure the wall is suitably reinforced to support the vanity unit
2. Rough in plumbing waste and water hot/cold supply locations for basin in wall and vanity unit
3. Lift vanity into position onto wall mount fixing and locate basin onto vanity top. Locate fasteners
for basin in wall. Seal basin to vanity with flexible waterproof sealant and fix basin with fasteners
to wall
4. External edges, where vanity meets wall, should be sealed using flexible waterproof sealant
5. All final door and drawer adjustments are the responsibility of the installer at the time of
installation
CLEANING RECOMMENDATIONS:
We recommend the use of soapy water or approved cleaners. This product should not be cleaned with
abrasive materials. Damage caused by any improper treatment is not covered by the product warranty.
Refer to Warranty Conditions
Posh Dominique Powder Room Vanity Unit Wall Hung
Right Hand Basin 1 Taphole White