Posch M6140, Руководство по эксплуатации

Страница: 15 / 32

A tight plug connection can rip the CEE plug out of the switch housing.
▪ This can be remedied using standard plugs and a silicone spray.
Any such damage to the switch is not covered by the guarantee.
Type E5.5
Connect the machine to the mains:
▪ Mains voltage 400 V / 50 Hz
▪ Circuit-breaker 16 A (tripping characteristic C)
▪ For the feed, a cable cross-section of at least 2.5 mm² must be used.
This cable cross-section is only a minimum specification. In the event of a lengthy
supply cable, its size must be determined by an electrician.
▪ Press the green ON button.
Note the rotation direction of the electric motor (see arrow on motor).
If the motor is rotating in the wrong direction:
Procedure as for type 1.
Start-up
15