▪ This oil has an extremely high viscosity index, exhibits excellent foaming and aging
characteristics and excellent flow properties at low temperatures and protects reliably
against wear and corrosion.
▪ Viscosity class ISO VG 46.
This high-quality oil comes highly recommended when changing the oil.
A mixture of products of the same quality poses no problem.
Note regarding the hydraulic oil change
The protective cover must be removed so that you can get to the vent screw.
Recommended hydraulic oils
Manufacturer
Oil specification
OMV
ATF II
SHELL
Donax TA
TOTAL
BIOHYDRAN SE 46* / AZOLLA ZS 46
ESSO
Univis N46
CASTROL
Hyspin AWH-M 46
ARAL
Vitam VF46
GENOL
Hydraulic oil 520
FUCHS
Plantohyd 32S * / Renolin B46 HVI
*.....biological hydraulic oils
Oil filter
1
2
1
Filter cover
2
Filter insert
The filter insert should be changed every time the oil is changed.
Any aluminium particles can be disregarded, as these occur when the pump is running in.
Do not wash out the filter insert with petrol or paraffin products, as these damage it.
Changing the transmission oil
The first oil change should be carried out after 100 operating hours, further oil changes
should then be carried out every 500 operating hours or yearly.
9.4.2
9.4.3
Maintenance
44
