Maintenance
Before maintenance work is carried out on the machine, it is vital that the drive is switched
off and secured to ensure that it cannot be switched on accidentally or started up by
unauthorised persons.
Disconnect the machine from the mains.
▪ In addition, pull out the plug of the device.
▪ Disengage the universal joint shaft on the tractor.
– Before disengaging, turn the manual throttle to minimum.
▪ Shut down the tractor.
▪ Remove the universal joint shaft from the tractor.
Work on electrical equipment must only be carried out by qualified electricians.
Never work without the protective guards in place.
Only use original - POSCH - spare parts.
Lubrication
Dispose of oily and greasy parts and oil residues in accordance with legal regulations.
Lubrication schedule
2
1
3
2
Lubrication interval
Item What/where
Quantit
y *
Weekly (every 40
operating hours - or more
frequently depending on
use)
1
Oil the saw blade to prevent corrosion
2
For the central lubricating header (both
housing bearings of the saw shaft)
1
3
Both housing bearings above conveyor belt
1/2
*.....The quantity relates to one stroke of a commercially-available grease press, whereby one stroke is approx. 1 cm³.
The lubrication points are marked with the lubricate symbol.
9
9.1
9.1.1
Maintenance
38
