- 76 -
Rev. 1.50
A10plus MiniPrinter
CONFIDENTIAL
GS W
[Name]
Set print area width
[Format]
ASCII
GS
W
n
L
n
H
Hex
1D
57
n
L
n
H
Decimal
29
87
n
L
n
H
[Range]
0
≤ (
n
L
+
n
H
× 256)
≤ 65535 (0 ≤
n
L
≤ 255, 0 ≤
n
H
≤ 255)
[Default]
Entire printable area
n
L
= 0,
n
H
= 2 (when paper width is set to 80 mm)
[Description]
In standard mode, sets the print area width to (
n
L
+
n
H
× 256) × (horizontal motion unit).
[Notes]
■ When standard mode is selected, this command is enabled only when processed at
the beginning of the line.
■ The print area width has no effect in page mode. If this command is processed in
page mode, the print area width is set and it is enabled when the printer returns to
standard mode.
■ If the [left print area width] exceeds the printable area, the print area width
is automatically set to [printable area
– left margin].
■ If this command and
GS L
set the print area width to less than the width of one character,
the print area width is extended to accommodate one character for the line.
■ Horizontal motion unit is used.
■ If horizontal motion unit is changed after setting the printable area width,
the printable area width setting will not be changed.
■ Printable area width setting is effective until
ESC @
is executed, the printer is reset,
or the power is turned off.
