POS-1L+
User manual V1.2
www.posbroadcast.com
3 of 10
1. General Description
The POS-1L+ is devices designed for broadcasting parameter and control FM transmitter
system via Local Area Network or Internet
This device has LAN 10/100 Mbits/Sec. when connect it in your network. You can monitor
parameter of FM transmitter system and control it in real time such change power transmission, off
power, etc. on anywhere if your can connected on your network
2. Installation and use Description
This chapter contains the necessary information for installing and using the machine. In the
event any aspects are not completely clear, for example when using the machine for the first time,
we recommend you carefully read the entire description contained in this manual.
2.1 Preparation
Unpack the POS-1L+ and before doing any other operation, be sure it has not been
damaged during transport. In particular check that all the connectors are in perfect condition.
The main fuse can be accessed from the outside on the rear panel. Extract the fuse carrier
with a screwdriver to check its integrity or for replacement, if necessary. The fuse to be used is this
type 30A @220VAC
Check that the POS-1L+ switches are in the "OFF" position. The POS-1L+ has one switch
for the mains power supply cable and completely interrupts the machine's mains power supply.
Connect the AC Output to Exciter and Amplifier.
Connect the RS-232 cable From Exciter to DATA IN 1.
Connect the RS-232 cable From Amplifier to DATA IN 2.
Connect the LAN cable.
Connect the AC Input cable.
2.2 Use
Check that the POS-1L+ switches are in the "OFF" position.
Check that the Exciter switches are in the "ON" position.
Check that the Amplifier switches are in the "ON" position.
