29
Update
MSI Parameters
•
Checksum Verification
< Single Modulo 10 >
Double Modulo 10
Modulo 11 & 10
•
Checksum Transmission
< Last digit not Transmitted >
Transmitted
Last 2 Digits not Transmitted
•
Max / Min Code Length Qualification
Select Max / Min Length Qualification
Max Length *
Min
Length
*
Programming Instructions : (1) Read the label. (2) Program the desired length by
reading Decimal Digits on page 49. (3) Read the “Validate” label (also on page 49)
to complete this setting.
30
Enter Setup
•
Fixed Code Length Qualification
Select Fixed Length Qualification
Fixed Length 1 *
Fixed Length 2 *
Programming Instructions : (1) Read the label. (2) Program the desired length by
reading Decimal Digits on page 49. (3) Read the “Validate” label (also on page 49)
to complete this setting.
EAN128 Parameters
•
Code ID Transmission
Enable
< Disable >
•
Field Separator
*
Programming Instructions : (1) Read the label. (2) Program the desired character
string by reading Hexadecimal Digits on page 50. One character consists of 2
hexadecimal digits. (3) Read the “Validate” label (also on page 50) to complete this
setting.
