POS-Mate PM-BCPRO-B, Инструкция по эксплуатации

Страница: 14 / 24

PM-BCBT2D-W Instruction Manual v.1.1 14
Data Transfer Settings
Data Transfer Mode
Your POS-mate PRO Barcode Scanner will transfer the data
scanned instantly to the connected device. Should the scanner
need to be used at a distance to the connected device, the
scanner can be configured to store the data and transfer it at a
later time by scanning the Storage Mode barcode.
This can be changed at any time by scanning the Instant Mode
barcode. Typically, the maximum distance for Bluetooth is 30
meters and for 2.4G is 150 meters, these measurements may
change due to electrical and/or environmental factors.
Instant Mode (default)
Storage Mode
Data Transfer Control
If your POS-mate PRO Barcode Scanner is set to Storage Mode,
you will need to transfer the data manually when within signal
range of your connected device. When in range, scan the Upload
Data barcode to upload all the stored barcodes. Once the data is
transferred, the data can be cleared by scanning the Clear All
Data barcode. Checking the number of barcodes held in the
scanner memory can be done by scanning the Total Data Stored
barcode.