manualshive.com logo in svg

Portwell WADE-8065, Руководство пользователя

Поделиться
Скачать
Portwell WADE-8065 Скачать руководство пользователя страница 46

BIOS Setup Information

 

WADE-8065 User’s Manual 

4-20 

 

Suspend Mode 

When enabled and after the set time of system inactivity, all devices will be shut off 
except the CPU. 
 
The choice: Disabled, 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min, 30 Min, 40 Min and 

1 Hour. 

 

HDD Power Down 

When enabled and after the set time of system inactivity, the hard disk drive will be 
powered down while all other devices remain active. 
 
The choice: Disabled, 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min,  
 

10 Min, 11 Min, 12 Min, 13 Min, 14 Min and 15 Min. 

 

Soft-Off by PWR-BTTN 

This item allows users to set the time to remove the power after the power button is 
pressed. 
 
The choice: Instant-Off, Delay 4 Sec. 
 

Wake-Up By PCI card 

The choice: Disabled, Enabled. 
 

Power On by Ring 

This option can be enabled to support Wake-On-Modem signal. 
 
The choice: Enabled, Disabled. 
 

USB KB Wake-Up From S3 

The choice: Enabled, Disabled. 
 

Resume by Alarm 

This item allows users to enable/disable the resume by alarm function. When 
“Enabled” is selected, system using ATX power supply could be powered on if a 
customized time and day is approached. 
 
The choice: Enabled, Disabled. 

 
 

Содержание WADE-8065































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды