System Installation
ROBO-8920VG2 User’s Manual
3-1
Chapter 3
System Installation
This chapter provides instruction to set up the system. The additional information is
able to help you install onboard PCI Express device and handle WDT operation in
software programming.
3.1
Dual Core Intel
®
Xeon Processor LV
Installing mPGA Socket 479
Figure 1. CPU socket demonstration
1)
Disengaging the Socket Actuator, use a screwdriver to disengage (open) the
socket actuator.
2)
Align the processor pins with pin holes on the socket. Make sure that the notch
corner or dot mark (pin 1) of the CPU corresponds to the socket’s bevel end. Then
press the CPU gently until it fits into place. If this operation is not easy or
smooth, don’t do it forcibly. You need to check and rebuild the CPU pin
uniformly.
Figure 2. CPU’s pin 1 mark
