Troubleshooting
ROBO-8716VG2A User’s Manual
5-4
Step 3: Connect TOGGLE SWITCH (J10) connector on ROBO-8716VG2A (Figure 5-6),
which is used to power on ATX Power Supply. Generally, the TOGGLE
SWITCH is located on the chassis of front panel.
Figure 5-6
Step 6: The figure below is the TOGGLE SWITCH, which is used to switch the ATX
Power on/off for SBC. Usually the TOGGLE SWITCH is located on the
chassis front panel. Pressing the switch button once will turn power on, and
press again to turn it off. (Figure 5-7)
Figure 5-7
