Frequent Asked Questions
FUDA2-S1x11 Series Panel PC User’s Manual
6-2
Q2: What to do if user wants to change the panel size?
Answer:
The PEDA Panel PC has two parts: IPC box and touch panel display. Thanks to the
modularization design, both parts are connected by one single cable. User can replace
the touch panel display from 12” to 21.5” but using the same IPC box.
*Note:
JP4 & SW2 need to be adjusted
based on each panel size.
Jumper Location:
Step 1. Detach the IPC box from the
panel display
Step 2. Place the IPC box upside down and
remove the mounting kits.
Step 3. Release the HDD tray
Step 4. Loosen the four screws of the cover
Step 3. Open the cover and find the
jumper inside
Step 4. JP4 and SW2 jumper location.
Adjust the jumper based on each panel.
JP4
SW2
