Portwell PEB-7702G2A, Руководство по установке

Страница: 62 / 69

Award BIOS Setup
56
3.9 PnP/PCI Configurations
This section describes configuring the PCI bus system. PCI, or
P ersonal C omputer I nterconnect, is a system, which allows I/O devices to
operate at speeds nearing the speed the CPU itself uses when
communicating with its own special components. This section covers some
very technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
Auto (ESCD)
Press Enter
Disabled
Item Help
_________________________
Menu Level
¾
BIOS can automatically
Cofigure all the boot and Plug
Compatible devices.
If you choose Auto,
You cannot select IRQ DMA
and memory base address
fields, since BIOS automatically
assigns them.
↑↓→←
Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-safe defaults F7: Optimized Defaults
Resource controlled by: Options Auto (ESCD), Manual.
The Award Plug and Play BIOS has the capacity to automatically configure
all of the boot and Plug and Play compatible devices. However, this
capability means absolutely nothing unless you are using a Plug and Play
operating system such as Windows
®
95. If you set this field to “Manual”
choose specific resources by going into each of the sub menu that follows
this field (a sub menu is preceded by a “
¾ ”).
IRQ Resources:
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
PCI / VGA Palette Snoop: Options Enabled, Disabled.
Leave this field at “Disabled”.