PEB-7600VG2A User’s Manual
2.1.4 Installing Cooling Fan
Warning
For a safety landing, avoid leaving prongs on hard surface.
Instructions
Smear thermal grease on the top of the CPU. Lower the CPU fan onto the CPU/CPU socket and secure it using the attachments
or screws provided on the fan. Finally, attach the fan power cable to the CPUFAN adapter. For more details on this, go to
http://www.intel.com
2.1.5 Main Memory
PEB-7600VG2A SERIES provides 2 DIMMs (184-pin Dual In-line Memory Module) to support 2.6V DDRAM
(Synchronized DRAM) as on-board main memory. The
maximum memory size is 256B~ 1GB with using 256MB/512MB/1GB technology. Supports up to 2 double sided DIMMs at
266/333/400MHz. The memory architecture adopts 128-bit data interface to support for x8 and x16 DDRAM(DDR1) device
width. In addition, it only support Non-ECC memory .
For system compatibility and stability, don’t use memory module without brand. You can also use the single or double-side
DIMM .The three DIMMs can be out of order. You can install different size of DDRAM module on DIMM1, DIMM2 or all to
boot up system.
Without out the contact and lock integrity of memory module with socket, it will impact on the system reliability. Follow
normal procedure to install your DDRAM module into memory socket. Before locking, make sure that the module has been
fully inserted into the DIMM slot.
9
