System Installation
PEB-2738I User’s Manual
3-2
3.3 Main Memory
Memory frequency / CPU FSB synchronization
PEB-2738 supports different memory frequencies depending on the CPU front side
bus and the type of DDR2-SDRAM.
CPU FSB
Memory Frequency
533MHz 533MHz
400MHz 400MHz
3.4
Installing the Single Board Computer
To install your PEB-2738 into standard chassis or proprietary environment, please
perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place PEB-2738 into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.4.1 to 3.4.4 to install INF/VGA/LAN/Audio drivers.
3.4.1
Chipset Component Driver
The chipset on PEB-2738 is a new chipset that a few old operating systems might not
be able to recognize. To overcome this compatibility issue, for Windows Operating
Systems such as Windows XP/VISTA, please install its INF before any of other
Drivers are installed. You can find very easily this chipset component driver in PEB-
2738 CD-title.
