Troubleshooting
PEB-2737VLA User
’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get PEB-2737VLA running with
success. As basic hardware installation has been addressed in Chapter 3, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
Unlike other Single board computer, PEB-2737VLA supports ATX only. Therefore, there is
no other setting that really needs to be set up. However, there are only two connectors that
must be connected—CN12 (8 pins Power Connector) Figure.
5.2
BIOS Setting
It is assumed that users have correctly adopted modules and connected all the
device cables required before turning on ATX power. 200-pin DDR2 SO-DIMM,
keyboard, mouse, PATA hard disk, VGA connector, device power cables, ATX
accessories are good examples that deserve attention. With no assurance of properly
and correctly accommodating these modules and devices, it is very possible to
encounter system failures that result in malfunction of any device.
To make sure that you have a successful start with PEB-2737VLA, it is
recommended, when going with the boot-up sequence, to hit “DEL” key and enter
the BIOS setup menu to tune up a stable BIOS configuration so that you can wake up
your system far well.
