BIOS Setup Information
NANO-6040/NANO-6040L User’s Manual
3-2
3.4
Installing the NANO-6040
To install your NANO-6040 into standard chassis or proprietary environment, please
perform the following:
Step 1: Check all jumpers setting on proper position.
Step 2: Place NANO-6040 into the dedicated position in the system.
Step 3: Attach cables to existing peripheral devices and secure it.
Note:
Please refer to section 3.4.1 to 3.4.4 to install INF/VGA/LAN/Audio drivers
3.4.1
Chipset Component Driver.
NANO-6040 uses state-of-art Intel® EG20T PCH chipset. It’s a new chipset that some
old operating systems might not be able to recognize. To overcome this compatibility
issue, for previous Windows Operating Systems such as Windows XP, please install
its INF before any of other Drivers are installed. You can find very easily this chipset
component driver in NANO-6040 CD-title.
Moreover, if using some old OS, the driver may not be supported anymore. We
recommend changing the different OS to comply with this new chipset.
3.4.2
Intel® Integrated Graphics.
With latest ATOM series structure, NANO-6040 has integrated graphic built-in
CPU. Therefore Intel® Integrated Graphic supports sharing on board physical
memories. NANO-6040 has internal 24bit 1ch LVDS & SDVO signal via Chrontel
CH7317A Transmitter to transform VGA output. This combination makes
NANO-6040 an excellent piece of multimedia hardware
.
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI-Express x1 Graphic card can take over the system display.
Drivers Support
Please find all the drivers in the NANO-6040 CD-title. Drivers support, Windows
XP/Win7.
3.4.3
Intel® PROSet Gigabit Ethernet Controller
Drivers Support
Please find Intel® WG82574IT driver in /Ethernet directory of NANO-6040 CD-title.
The drivers support Windows XP/Win7.