System Installation
LYNX-6000 Series User
’s Manual
2-2
2.2 M.2 Key B 2242 and Mini PCIe expansion Installation
NOTE:
Expansion card may various for different model, please check specification of each model.
Step 1.
Remove 2 screwsat the bottom of
the front bracket.
NOTE:
Need to remove the screw of COM
port for some specific model.
Step 2.
Remove all 4 screws from the rear
bracket. Remove the rear bracket.
Step 3.
Pull out the bottom heat sink.
Step 4.
Turn around the system, you can
find Mini PCI-e and M.2 Key B 2242 card
socket and the expansion cards can be
installed on it.
Step 5.
Finishing the installation, put the
bottom heat sink back to the initial position.
Lock the front/rear bracket by screws.
Note:
Make sure to fasten the screw back with
proper torque (5kgf-cm) by torque wrench
on LYNX-6000. Improper torque may cause
the damage of screw thread on the
aluminum chassis.
Mini PCIe
M.2 Key B 2242
