Portwell FUDA3-S1-22 Series, Руководство пользователя, Страница: 32 / 99

System Installation
FUDA3-S1x22 Series Panel PC User’s Manual 2-17
2.8 I/O Interfaces
2.8.1 Front View
TFT-LCD Display with Projective Capacitive Touch Screen:
The Panel PC is built in a TFT-LCD display and designed with a projective capacitive
touch screen. The surface of the display is also mechanically protected through the
touch screen. The touch screen of FUDA3-S1x22 Series can support up to 10 touch
points under Windows 10.
Aluminum Front Bezel:
Rugged Aluminum front bezel meets IP65 protection.
True Flat Projective Capacitive Touch Screen:
The projective capacitive touch screen (USB interface) registers contacts of a
conductive object such as fingers and allows moving the mouse pointer. It can sense a
passive stylus or gloved fingers as well. Users don’t need to install touch screen
driver for projected capacitive multi-touch because driver is included in operating
system.
Do not use a hard or a pointed object (like screw drivers or pliers) to operate
the touch screen, because such an action will damage the surface of touch
screen.
Front Panel Care and Clean
Front Mild detergent and water, or isopropyl alcohol is recommended for
cleaning. Use of solvents with strong acidity or alkalinity, which could react
with the paint or printed color or plastic, should be avoided.
The true flat touch screen surface is subject to burning and scaring from direct heat
sources such as lighters or cigarettes. The front display is against water and dust
(IP65). The touch screen built in FUDA3-S1x22 Series can resist the following
chemicals such as acetone, methylene chloride, methyl ethyl ketone, isopropyl
alcohol, hexane, unleaded gas, diesel fuel, motor oil vinegar, cooking oil, saline
water, and so on.