System Installation
WEB-35C3 User’s Manual
3-17
Chapter 3
BIOS Setup Information
WEBS-3585 system adopts WADE-8017 mother board. WADE-8017 is equipped
with the AMI BIOS stored in Flash ROM. These BIOS has a built-in Setup
program that allows users to modify the basic system configuration easily. This
type of information is stored in CMOS RAM so that it is retained during
power-off periods. When system is turned on, WADE-8017 communicates with
peripheral devices and checks its hardware resources against the configuration
information stored in the CMOS memory. If any error is detected, or the CMOS
parameters need to be initially defined, the diagnostic program will prompt the
user to enter the SETUP program. Some errors are significant enough to abort the
start-up.
3.1 Entering Setup
Power on the computer and the system will start POST (Power on Self Test) process. When the
message below appears on the screen, press <Delete> or <ESC> key will enter BIOS setup screen.
Press<Delete> or <ESC> to enter SETUP
If the message disappears before responding and still wish to enter Setup, please restart the system
by turning it OFF and On or pressing the RESET button. It can be also restarted by pressing <Ctrl>,
<Alt>, and <Delete> keys on keyboard simultaneously.
Press <F1> to Run General Help or Resume
The BIOS setup program provides a General Help screen. The menu can be easily called up from
any menu by pressing <F1>. The Help screen lists all the possible keys to use and the selections for
the highlighted item. Press <Esc> to exit the Help Screen.