background image

 

 

 11 

Portsmith

, LLC 

Version 1.1 

daptaport Bluetooth to Ethernet Adapter User Guide 

 

Other Product Information 

Technical Support 

For assistance, contact technical support via email at 

[email protected]

 or call (208) 888-5813 ext 

1004. When contacting technical support, please provide the following information: 

 

Your name, email address and phone number. 

 

Portsmith adapter model and serial number (from the label on the underside of the adapter). 

 

Bluetooth equipment model 

 

Detailed problem description 

Regulatory Information 

FCC Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.  However, there is no guarantee that interference will not occur 
in a particular installation.  If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio or television technician for help. 

 
Portsmith, LLC is not responsible for radio/TV interference caused by using unauthorized cables or by 
making unauthorized changes to this equipment. 

 

Radio Frequency Interference Requirement - Canada 

This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. 
 
 

 
Portsmith, LLC 
850 East Franklin Rd Suite #401 
Meridian, ID 83642 
USA 

              Telephone: 
              (208) 888-5813 

 

 

 
 
 
 
 
 

P

art Number 184469-000 Rev 1.0 

Содержание PSA5BT1E












Отзывы: