Portos DC1, Руководство пользователя

Страница: 3 / 8

3
1. Programming the radio drive on a specific channel of any
transmitter .
IMPORTANT!!!
While programming, only the drive being programmed should be
connected to a power supply
.
A. Method one
In order to program the drive, open the inspection hatch of the roller shutter and :
1. Press the microswitch located on the lead emerging from the head of the drive for 1
second – the motor will confirm with a single beep sound and the shutter will move
briefly UP and DOWN .
2. Using the C / - buttons, select the channel you want to program and press
P2 – the motor will make a single beep sound .
3. Press P2 again, the motor will make a single beep sound again .
4. To finish the programming process, press UP. You will hear 6 beeps and the roller
shutter will move briefly up and down .
B. Method two
After connecting the motor to a power supply, you will hear a long single beep sound
and the motor will move briefly up and down (if you do not press any button within
12 seconds, the motor will quit the programming mode)
.
1. Using the C / - buttons, select the channel you wish to program :
2. Press the P2 button, the motor will make a single beep sound .
3. Press P2 again, the motor will make a single beep sound again.
4. Press the UP button, the motor will make 6 beeps and move briefly up and down,
which means that the channel has been programmed .