USER MANUAL
–
Portman Lights P1 Retro Lamp
|
P1 Retro Lamp v2.0
13/16
When the fixture works in the wireless mode (only when WDMX card is installed) it is
receiving DMX 512 signal from Wireless Solution Sweden transmitters and can send the
signal throughout the 5 or 3 pin DMX OUT XLR socket. You can put the fixture with
WDMX card installed as a first fixture in a line and use it as a WDMX receiver. The P1
Retro Lamp supports bi - directional WDMX TRX module. It means, that the fixture
supports RDM in wireless mode too. To link P1 Retro Lamp with W-DMX transmitter first
use “UPAIR ALL WDMX DEVICES” option from menu, than turn the scanning mode in
the transmitter. Transmitter will link with all unlinked devices. For more detailed
information please refer to your transmitter’s user manual.
Menu
Navigation buttons are located under the LCD display on the back panel. To enter the
menu hold enter button for 2 seconds. To navigate the menu
use the “+” and “
-
“ buttons.
To exit the menu from any level hold enter for 2 seconds or use the exit function. For
confirming simply
push
the
enter
button.
