7
A.
LOGIN
DIALOG WINDOW
Select the correct COM port number, then “reset” the unit by pressing the reset button, and
next click “OK”.
Note that: it is necessary to power on and reset the device soon after click the “ok” button.
PC setup program will detect the hardware for 60 seconds. If no hardware is detected, it
will exit.
During the opening up screen shown as below, user can press “Esc” key to terminate the
program.
B.
V
ERSION
N
O
.
C
HECKING
The below interface will last until correct UNIT Version No. is checked. (You should run
this program before turn on power of UNIT)
C.
M
AIN INTERFACE
1.
[U
SER DETAIL
:]
