6
FlUSHmOUnt InStRUCtIOnS
2.a. Using wire cutters (not included), trim the fixture
wire and ground wire approximately 12 in. and
then strip the casting 3/4 in. from end of wire.
2.
b. Attach ground fixture wire to either green ground
screw (JJ) screwed on crossbar (CC) or the
ground wire in the outlet box (usually GREEN or
BARE). If attaching to ground wire in the outlet
box, fasten together with a wire connector (EE)
and tightly wrap with electrical tape (not included).
IT IS IMPORTANT THE OUTLET BOX IN YOUR
HOME IS PROPERLY GROUNDED.
2.
c. Connect the neutral (WHITE or IdENTIFIEd
side) fixture wire to the neutral (usually WHITE)
wire from the outlet box. Fasten wires together
with a wire connector (EE) and tightly wrap wire
connector (EE) with electrical tape.
2.
d. Connect the hot (BLACK or PLAIN side) fixture
wire to the hot (usually BLACK) wire from the
outlet box. Fasten wires together with a wire
connector (EE) and tightly wrap wire connector
(EE) with electrical tape.
2
WHITE WIRE
FROM OUTLET BOX
WHITE OR IDENTIFIED
FIXTURE WIRE
BLACK WIRE
FROM OUTLET BOX
PLAIN OR BLACK
FIXTURE WIRE
BARE OR GREEN
BARE OR GREEN
GROUND WIRE
FROM OUTLET BOX
FIXTURE GROUND
WIRE
BARE OR GREEN
GROUND WIRE
FROM OUTLET BOX
ee
jj
HaRdWaRe USed
ee
Wire Connector
x 3
jj
Green Ground Screw
x 1
3. Raise column (d) up to the ceiling, aligning the
two holes in the preassembled canopy with the
mounting screws (ll) threaded on crossbar (CC).
Secure assembly with ball nuts (oo).
Proceed to FINAL INSTRUCTIONS on page 8.
3
d
OO
ll
CC
HaRdWaRe USed
OO
Ball Nuts
x 2
HangIng StYle mOUntIng
1.a. For hanging installations, insert the short mounting
screws (NN) into the holes on the preassembled
canopy on column (d) and secure with ball nuts
(oo).
1.
b. Thread fixture loop (E) onto the coupling at center
of column (d).
HaRdWaRe USed
nn
Short Mounting Screw
x 2
OO
Ball Nuts
x 2
1
d
OO
nn
e
