Lowes.com/portfolio
4
BB
DD
EE
C
AA
ASSEMBLY INSTRUCTIONS
1. Shut off power at the circuit breaker or fuse panel
before removing the old fixture.
DANGER:
Failure to disconnect the power
supply prior to installation may result in serious injury
or death.
2. If necessary, remove the old fixture. To better assist
you later in the wiring process, consider making a
sketch of how the fixture is wired before you remove it.
3. Attach the mounting bracket (C) to the outlet box
(not included) using the long mounting screws
(AA). Then, remove the cap nuts (DD) and rubber
washers (EE) from the short mounting screws (BB).
Note:
Short mounting screws (BB) should protrude
out from the outlet box and the horizontal bar with
short mounting screws (BB) should be parallel to the
horizon to ensure proper mounting.
Hardware Used
AA
Long Mounting
Screw
x 2
Short Mounting
Screw
x 2
Cap Nut
x 2
Rubber Washer
x 2
1
ON
OFF
ON
OFF
3
2
BB
DD
EE
