2
WARNING
READ ALL INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING TO ASSEMBLE THIS EQUIPMENT. ASSEMBLY
OF THIS EQUIPMENT MUST BE DONE BY PHYSICALLY CAPABLE ADULTS ONLY.
PARTS LIST
Item No. Qty.
Part Number
Description
Item No. Qty.
Part Number
Description
1
6
TUBR 00706 0G0
Crossbar – 6'-0" Lg.
2
8
TUBR 00704 0G0
End Frame Bar – 1'-5-3/8" Lg.
3
8
TUBR 00705 0G0
End Frame Bar – 4'-1" Lg.
4
4
TEES 00014 000
Tee – 2-Way
5
12
TEES 00015 000
Tee – 3-Way
6
16
PCAP 00058 002
Tube Plug
7 2 NETS
00035
000 Net
TOOLS REQUIRED: 5/32" Allen Wrench
1.
Check all items against Parts List Above to ensure all have been included.
2.
Start by pulling the Upper Front Cross Bar (1), Lower Rear Cross Bar (1) and Lower 1'-5 3/8" End Frame Bar (2) support pieces
through the net sleeves. See Detail On Other Side.
3.
Assemble the bottom portion of the goal frame into the connector tee's. The front two End Frame Bar supports require one 2-Way
Tee Casting on the front and one 3-Way Tee casting on the rear of the unit. Make sure that all support tubes are flush with the
top's & bottom's of the Connector Tee's.
4.
Insert the rear 4'-1" Lg. End Frame supports (3) into bottom of Connector Tee's & attach upper Tee Castings to End Frame
supports.
5.
Pull net and supports up and tie the rear of the goal frame together by connecting the Upper Rear Crossbar (1) to the back Vertical
End Frame Tee's.
6.
Insert front two 4'-1" Lg. End Frame Bars supports through net sleeve and anchor them into the bottom Tee Castings.
7.
Assemble the Upper 1'-5 3/8" End Frame Bar supports (2) to both upper vertical End Frame Bars to tie the unit together.
8.
Tighten all set-screws in tee castings to frame supports.
9.
Apply cap plugs to all exposed bar ends.
Porter Athletic Equipment Company
2500 South 25
th
Avenue, Broadview, IL U.S.A., 60155
Toll Free: (800) 947-6783
·
Phone: (708) 338-2000
·
Fax: (708) 338-2060
www.porter-ath.com
SAVE THESE INSTRUCTIONS FOR FUTURE USE
