6
ADDITIONAL SPECIFIC SAFETY RULES
1.
Hold power tool by insulated gripping surfaces when performing an
operation where the cutting tool may contact hidden wiring or its own
cord.
Contact with a "live" wire will make exposed metal parts of the tool
"live" and shock the operator.
2.
Use clamps or other practical way to secure and support the
workpiece to a stable platform.
Holding the work by hand or against your
body is unstable and may lead to loss of control.
3.
Keep blades sharp.
Sharp blades will do the job better and safer.
4.
Keep hands away from cutting area.
When sawing never reach
underneath or behind the material being cut for any reason.
5.
When you have finished a cut
be careful not to come into contact with the
blade. Turn off the motor immediately.
6.
EXERCISE EXTREME CAUTION WHEN BLIND CUTTING
TO BE CERTAIN THAT THERE ARE NO FOREIGN OBJECTS SUCH AS
ELECTRICAL WIRE, CONDUIT, PLUMBING PIPES, ETC., THAT MAY
COME INTO CONTACT WITH THE BLADE.
7.
Never hold work
in your hand, lap, or against other parts of your body
when sawing.
8.
Wear eye and hearing protection. Always use safety glasses.
Everyday
eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
Eye protection equipment should comply with ANSI Z87.1 standards.
Hearing equipment should comply with ANSI S3.19 standards.
9.
Use of this tool can generate and disburse dust or
other airborne particles, including wood dust, crystalline silica dust
and asbestos dust.
Direct particles away from face and body. Always
operate tool in well ventilated area and provide for proper dust removal.
Use dust collection system wherever possible. Exposure to the dust may
cause serious and permanent respiratory or other injury, including silicosis
(a serious lung disease), cancer, and death. Avoid breathing the dust, and
avoid prolonged contact with dust. Allowing dust to get into your mouth or
eyes, or lay on your skin may promote absorption of harmful material.
Always use properly fitting NIOSH/OSHA approved respiratory protection
appropriate for the dust exposure, and wash exposed areas with soap and
water.
