Porter-Cable PCC780, Инструкция по эксплуатации

Страница: 10 / 48

English
8
3. Install blade 13 onto the arbor 14 . Ensure the blade
is fully on the arbor 14 and fitted with the rotational
direction matches the direction of the washer.
Fig. D
13
14
15
16
4. Install outer clamp washer 15 and blade nut 16 . While
holding blade in place, fully tighten blade nut with
supplied wrench
4
.
nOTE: Do not overtighten. Make sure the tile blade is
secure before use.
15
Fig. E
16
5. Loosely install splash hood bracket
17
using the two
supplied screws 18 .
Fig. F
18
17
6. Use supplied edge guide 7 to align bracket 17 and
blade 13 as shown in Figure G. Once bracket is aligned,
fully tighten hood bracket screws.
Fig. G
13
7
17
7. Remove carriage bolt 19 and nut 20 from splash
hood
5
and install splash hood onto the splash hood
bracket. Insert carriage bolt through both the splash
hood and bracket. Install and loosely tighten the
nut
20 . Adjust the height for your specific application.
Fully tighten the nut 20 .
Fig. H
20
19
5
17
Fig. I
20
To Attach The Edge Guide (Fig. J)
The edge guide can be installed 1 of 2 ways, 45 ° or 90 °.
1. Place edge gude 7 on the cutting cart fence 9 ..