manualshive.com logo in svg

Porter-Cable H450IS, Инструкция по эксплуатации

Поделиться
Скачать
Porter-Cable H450IS Скачать руководство пользователя страница 8

8- ENG

D28512

SPECIFICATIONS

MODEL

H450IS

HORSE POWER

9

RATED/SURGE WATTS

4500/5500

VOLTAGE

120/240V

AMPERAGE

37.5A/18.8 A

PHASE

SINGLE

HERTZ

60 Hz

ENGINE SPEED

3600 RPM

MAX. AMBIENT TEMP.

104° F

FUEL CAPACITY

7 GALLON

RUN TIME @ 50%/100%

13.4/8.7 HOURS

CONSUMER GENERAL AND SERVICE INFORMATION

• Please read and follow these instructions for proper use and maintenance.

• If you experience any problems and need assistance, please call us at our toll

free number 

1-888-559-8550, Monday through Saturday.

• If repair or service part purchase is required, our many Authorized Warranty

Service Centers are conveniently located and equipped to handle all in-
warranty and out-of-warranty service.

• For the location of the nearest Authorized Warranty Service Center call 

1-888-559-8550, 24 hours a day, 7 days a week.

• Retain sales receipt as proof of purchase for warranty service.

•

Read and understand all safety warnings.

• Do not operate this unit until you have read and understand this Owners

Manual for Safety, Operation, and Maintenance Instructions.

• Do not operate this unit until you have read and understand the Engine

Owners Manual for Safety, Operation, and Maintenance Instructions.

Note:

Photographs and line drawings used in this manual are for reference only and

do not represent a specific model.

Содержание H450IS

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды