8. Do
not
use drill as a router or try to elongate or enlarge holes by twisting the drill. Drill bits
may break and
cause
injury.
9. Keep hands away
from rotating parts.
Keep drill bit clear
of yourself and all objects while installing and removing bits (see
INSTALLING AND REMOVING BITS).
11. Some wood contains preservatives which can be toxic.
Take extra care to prevent inhalation
and skin contact when working with these materials. Request, and follow, all safety information
available from
your
material supplier.
1. SAVE THESE INSTRUCTIONS.
This manual contains important safety and operating
instructions for FLEX Battery Chargers.
2. Before using a battery charger,
read all instructions and cautionary markings on (1) battery
charger, (2)
battery
pack, and (3) product using battery.
3. CAUTION:
To reduce risk of injury, FLEX battery chargers should only be used with the FLEX
batteries as listed in the following chart. Other types of batteries may burst causing personal
injury
and
damage. Do not charge FLEX batteries with any other charger than listed in the
following chart.
4. Do not expose charger
to rain, snow or frost.
5. Do not abuse cord.
Never carry charger by cord or yank it to disconnect from receptacle.
Pull by plug rather than cord when disconnecting charger. Have damaged or worn power cord
and strain reliever replaced immediately. DO NOT ATTEMPT TO REPAIR POWER CORD.
6. Make sure cord
is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
7. Do not operate
charger with damaged cord or plug have them replaced immediately. DO
NOT ATTEMPT TO REPAIR POWER CORD.
8. Do not operate
charger if it has received a sharp blow, been dropped, or otherwise damaged
in any way; take it to a qualified serviceman.
9. Do not dissassemble charger or battery pack.
Take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
Unplug charger
from outlet before attempting any maintenance or cleaning -to reduce risk
of electric shock.
11. Charge the battery pack
in a well ventilated place, do not cover the charger and battery pack
with a cloth, etc., while charging.
12.
Do not store
the charger or battery pack in locations where the temperature may reach or
exceed 50°C (such as a metal tool shed, or a car in the summer), which can lead to deterioration
of the storage battery.