9
Setting up
CLEANING THE JET
If there is gas getting to the Scatterbird but there are no bangs or intermittent bangs, it could
be a blocked jet. The symptoms of this are only 1 or 2 successful ignitions in a series of
4 or 5, due to insufficient gas being delivered each time.
1.
To access the
2 piece jet
, loosen the screw
from the solenoid that retains the connector.
2.
Remove the split pin.
3.
Pull out the complete jet assembly.
5.
Clean carefully using a
1.0mm drill
or
an appropriate jet cleaner and
re-assemble and test.
4.
Hold the jet and solenoid firmly and unscrew
the jet from the housing with a
7
/
16
”
spanner
NOTE:
it is a tapered thread.
Split pin
Remove jet assembly
Screw
If your Scatterbird comes with the
one
piece jet
which was fitted only to early
models of the MK3, we recommend
replacing it with the
two piece
version for faster and more convenient
maintenance. For removing
one piece
jets
please contact technical services on
01234 889 454
.
1
2
3
4
5
