www.portek.co.uk
01234 88 94 54
Use
ALL
safety equipment as recommended by your chainsaw manufacturer. Don’t
take chances.
DO NOT RUSH
- take your time and work at a reasonable pace
ENSURE ALL THE FIXINGS ARE TIGHT
- check the tightness of the bolts and also
chainsaw vice before work and regularly whilst operating as fixings can become
loose due to the vibration of the chainsaw
CHECK CHAINBAR GUARD DOES NOT TOUCH THE CHAIN
- DO NOT continue to use the
Logmaster if the chain guard is touching the chain. Adjust immediately.
ENSURE LOGMASTER IS STABLE
- DO NOT use if the Logmaster is unsteady due to
uneven or very soft ground.
IF IN DOUBT, DO NOT USE
- if you are not sure about the chainsaw or any aspects of
using your chainsaw with the Logmaster, get expert advice - don’t take chances.
Read and understand these
safety instructions before use
Head, eye and hearing protection
Face protection visor to EN1731
or Safety Glasses/Goggles to glasses to EN166
Hearing protection to EN 352-1: 2002
Helmet to EN 397
Get the right safety equipment - don’t take chances
Hand protection
Chainsaw Gloves to EN381-7
Foot protection
Steel Toecap Boots to EN EN345-2
distinctively marked as suitable for
chainsaw use, to EN381-3[1]
Body and Limb protection
Chainsaw protective jacket to EN381-11
Cut protection trousers type A minimum
to EN381-5
Logmaster Instructions 2016.indd 2
20/07/2016 10:41
