Portech MV-370S, Руководство пользователя

Страница: 7 / 39

-5-
6 CABLING
6.1 Connect the internet cable from HUB to the ‘WAN’ connector of the MV-372S.
*If you need to stack up more MV-372S, you can stack up as follows.
6.2 Connect the antenna and put it in proper position to get the best signal reception.
6.3 Insert the SIM card from back of the main body. (Take the slide off first).
6.4 MV-370S/MV-372S support manual switch IP MODE to DHCP and manual restore
to original firmware for update failure.
There are SW1 and SW2 button shows as follow diagram:
6.4.1 SW1 function: Restore the factory default IP 192.168.0.100
STEP: Please press the SW1 in 7~8 seconds till the Mobile and LAN LED flash
blink.
6.4.2 SW2 function: Switch MV-37X IP to DHCP MODE
STEP: Please press the SW2 about 7~8 seconds till the Mobile and LAN LED
flash blink.
6.4.3 SW1 + SW2 function: Manual restore and restart MV to original firmware for
update failure.
STEP: Please remove the MV power cable first.
Then press the SW1 and SW2 in 4~5 seconds till the Mobile and LAN LED flash
blink. At same time,please plug in the power DC 12V . Then the device will
reboot auto. Please login to 192.168.0.100 for firmware update procedure.
6.5 Connect the power adaptor. The ‘POWER’ LED should be light up.