Portacool Jetstream 240, Руководство пользователя

Страница: 10 / 16

TROUBLESHOOT
1. Check power
A. Reset breaker*
B. Reset GFCI*
2. Replace motor
3. Replace relay
1. Open windows or doors
2. Check water distribution system
A. Clean or replace evaporative media
B. Check water level
C. Make sure evap cooler is level, clean spray bar
D. Clean or replace pump
E. Check for leaks and correct
2. Replace media
3. Turn on pump before starting fan
1. Check and tighten where needed
2. Inspect and adjust, or replace fan blade
1. Make sure media is properly positioned in the
frames and evaporative cooler is level
off) or discontinue use until outdoor humidity drops
3. Tighten connection or replace hose
1. No electrical power to cooler
A. Circuit breaker tripped
B. GFCI tripped
2. Motor overheated and/or frozen
A. KUUL evaporative media plugged
B. Dry streaks on KUUL evaporative media
C. Large dry spots on KUUL evaporative media
D. Pump not working
E. Loose water connections
1. Drain bushing/cap not tight
1. Stale or stagnant water in tank
2. Media mildewed or clogged
3. Media not wetted before cooler is turned on
1. Loose parts
2. Fan blade rubbing shroud
1. Too much water delivered to evaporative media
2. Outdoor humidity is too high or it is raining
3. Leaking hose
Evaporative cooler fails to start or
deliver air
Evaporative cooler starts but air delivery
Water draining from evaporative cooler
Musty or unpleasant odor
Knocking, shaking, or rattling sounds
Water droplets in the discharge air
stream
Turn off all power to the cooler before attempting to troubleshoot any of the following symptoms. For problems not
listed, please contact customer support.
*I