PCA-2264
WINCH SUPPORT FOR VERTICAL PULLING
12
Document name: PCA-2264 - User Manual
Revision : 04 – 2019/08/30
User Manual
READ CAREFULLY
Installation no. 8 - The winch faces the load. The rope is directly in line with the winch (horizontal).
Accessories used
A PCA-1266
Heck-Pack anchoring system with adaptor for 50 mm towing balls (
vehicle
)
B PCA-1332
Pivoting anchor for vertical pull support
C PCA-2264
Winch support for vertical pulling
WHEN USED IN DIRECT LINE, THE PIVOTING ANCHOR FOR VERTICAL PULL SUPPORT (PCA-1332) MUST BE FIXED TO THE
WINCH SUPPORT FOR VERTICAL PULL (PCA-2264). THIS ANCHOR (SOLD SEPARATELY) WILL ALLOW THE WINCH TO ALIGN WITH THE LOAD.
PUT
THE ROPE ON THE WINCH ENTRY PULLEY.
IN THIS SITUATION,
DO NOT USE THE
REDIRECT PULLEY
Supplied with the
Winch support for
vertical pulling
.
A
C
B
